Summary The bent arm lateral raise is a dumbbell shoulder isolation exercise that mainly works the lateral (side) deltoid, with the anterior (front) deltoid assisting. The defining cue is a 90-degree elbow bend held throughout the rep, with the forearms pointing straight ahead. The bend shortens the lever arm at the shoulder and reduces torque demand compared to a straight-arm lateral raise. Coratella et al. (2020) found much higher side deltoid activity with the straight arm, and more front deltoid activity with the bent arm than with the standard straight-arm raise. ACE's 2014 shoulder study ranked the bent arm version second of ten exercises for the middle deltoid. Beginners start standing or seated with 3-8 lb dumbbells for 2-3 sets of 12-15 reps. Advanced trainees work up to single-arm variations or drop sets with 10-20 lb loads.

The bent arm lateral raise is the same movement pattern as a standard lateral raise with one key difference. Your elbows stay bent at 90 degrees throughout the entire rep. That single change shortens the lever arm at your shoulder, which reduces the torque demand on the joint and lets you use heavier dumbbells without sacrificing control. For beginners, it is one of the most accessible ways to start building the medial deltoid. For experienced lifters dealing with shoulder sensitivity, it is a shorter-lever way to keep training side delts.

The biomechanics are straightforward. A longer lever arm (straight arm) means more torque at the shoulder for a given dumbbell weight. A shorter lever arm (bent arm) means less torque. Coratella et al. (2020) found that straight-arm lateral raises produced much higher side deltoid activity than the bent-arm version, while the bent arm produced more front deltoid activity than the standard straight-arm raise. Each version used a weight the lifters could lift eight times at most, set separately for each version, and the paper does not list the weights. Both versions build shoulders, and ACE's 2014 shoulder study ranked the bent arm lateral raise second of ten exercises for the middle deltoid.

This guide covers the exact technique, form tips for the key steps, the mistakes that turn this into a trap exercise, and how to progress from beginner to advanced variations.

Quick Facts: Bent Arm Lateral Raise

This exercise belongs to
Bent arm lateral raise muscles worked: side delts highlighted, front delts secondary, elbows bent at shoulder height
The bent arm lateral raise mainly works the side delts, with the front delts helping. In one EMG study the standard straight-arm lateral raise worked the side delts harder, while the bent arm version worked the front delts more.

Muscles Worked

Primary mover. The lateral (side) deltoid drives the rep. It contracts concentrically as you raise the elbows out to shoulder height and controls the eccentric phase as you lower under gravity. The side deltoid is what creates the visual width of the shoulder, and the lateral raise pattern (bent or straight arm) is the most direct way to load it in isolation.

Secondary mover. The anterior (front) deltoid helps raise the arms, and in one EMG study it worked more in the bent arm version than in the straight-arm raise.

Evidence. Two EMG studies measured this exact exercise and disagree on which deltoid head leads. In ACE's 2014 shoulder study (16 men with weight-lifting experience, standing, as the FitCraft app teaches it), the bent arm lateral raise reached 77% of maximal middle deltoid activity, second of the ten exercises tested, with the front and rear deltoids at 32% and 33%. In Coratella et al. (2020) (ten competitive bodybuilders, seated), the front deltoid was more active than the side deltoid, and the straight-arm lateral raise produced much higher side deltoid activity than the bent arm version. The bent arm version produced more front deltoid activity than the standard straight-arm raise. Reference exercise libraries such as ExRx rank the side deltoid as the target and the front deltoid as a helper, so the side deltoid is listed as the primary muscle and the front deltoid as secondary.

How to Do a Bent Arm Lateral Raise (Step-by-Step)

  1. Stand with dumbbells at your sides, elbows bent 90 degrees. Feet shoulder-width apart with a soft bend in your knees, a dumbbell in each hand. Start with your upper arms by your sides, or held slightly out from them, and bend your elbows to a right angle so your forearms point straight ahead. Palms face each other. Brace your core and pull your shoulders down and back. This 90-degree elbow angle stays locked for the entire set. Think of your arms as two L-shaped brackets. Once you set that bend, it does not change.
  2. Raise your elbows out to shoulder height. Leading with your elbows, raise both arms out to your sides. Your forearms keep pointing forward, level with the floor, and your palms turn to face the floor as the arms rise. The motion happens at the shoulder joint only. Stop when your upper arms are parallel to the floor, elbows at shoulder height. Not above. Form tip: keep the elbow bend at about 90 degrees all the way up. If the dumbbells drop toward the floor or tip up toward the ceiling, reset before the next rep.
  3. Pause at the top. Hold it briefly. Your upper arms should be parallel to the floor, forearms pointing straight ahead and level with the floor, palms facing down, elbows at shoulder height. If you cannot hold this position without swinging or shrugging, the weight is too heavy.
  4. Lower with control. Slowly bring your elbows back down to your sides, or to just short of them. Maintain that 90-degree bend throughout. Fight gravity on the way down. The eccentric phase matters. Letting the weight just drop is throwing away stimulus.
  5. Reset and repeat. At the bottom, let your arms settle briefly, reset your shoulder blades down and back, and go again. Exhale on the way up, inhale on the way down. Beginners: 3 sets of 12-15 reps. If you are using 8-pound dumbbells and it burns by rep 10, you are in the right range.
Bent arm lateral raise proper form: elbows at a right angle, forearms pointing forward and upper arms at shoulder height
Raise your elbows out to the sides and keep them bent about 90 degrees for the whole set. Pause when your upper arms reach shoulder height, then lower slowly with your torso still.

Common Mistakes to Avoid

The bent arm lateral raise is more forgiving than the straight-arm version, but that does not mean it is mistake-proof. These four errors are what turn a solid deltoid builder into wasted effort.

Get this exercise in a personalized workout

FitCraft, our mobile fitness app, uses its AI coach Ty to program isolation exercises like this into your plan at the right volume and intensity, based on your level, goals, and equipment. Ty was designed and trained by , MPH (Brown University) and NSCA-CSCS, with research published in the Journal of Strength and Conditioning Research and Medicine & Science in Sports & Exercise.

Take the Free Assessment Free · 2 minutes · No credit card

Variations: Beginner to Advanced

Seated Bent Arm Lateral Raise (Beginner)

Sit on a bench or sturdy chair with your feet flat on the floor. Performing the bent arm lateral raise seated eliminates any help from your lower body. You cannot swing, you cannot use momentum, and you cannot cheat. That makes it a good starting point for beginners who want to learn what the side deltoid feels like when it is working. Use light dumbbells, 3-8 pounds. Focus on a slow lift, a brief pause at the top, and a slow lower. Once you can complete 3 sets of 15 reps with a clear burn in the side of your shoulder, move to the standing version.

Standing Bent Arm Lateral Raise (Beginner)

This is the standard version described in the step-by-step above, and the version the FitCraft app teaches, rated Beginner. Standing adds a small stability demand. Moderate weight, 10-15 reps, strict form. The key is consistency. You should feel the work in the side and front of your shoulders. If you do not, slow down the tempo and pause briefly at the top.

Single-Arm Bent Arm Lateral Raise (Advanced)

Hold a sturdy surface with one hand for balance and perform the movement one arm at a time. Single-arm work lets you focus completely on the working shoulder, eliminates any side-to-side compensation, and lets you identify strength imbalances. Start with a lighter dumbbell than you use for the two-arm version. 3-4 sets of 10-12 reps per arm.

Alternative Exercises

If bent arm lateral raises do not suit you, these alternatives hit the same muscle:

Bent arm lateral raises common mistakes, listed beside the correct top position with the elbows bent and forearms forward
Keep your forearms level and pointing forward, and hold the elbow bend as your arms rise. Lift with your shoulders, without swinging your body, shrugging or raising your elbows above shoulder height.

When to Avoid or Modify Bent Arm Lateral Raises

Bent arm lateral raises are safe for most healthy adults, but a few conditions warrant modification or a different exercise. Always consult your physician or physical therapist if you have any of the following, especially before adding load or increasing volume.

Related Exercises

How to Program Bent Arm Lateral Raises

The ranges below draw on the Ratamess et al., 2009 ACSM Position Stand on Resistance Training. It recommends 8-12 reps per set for novices, and lighter sets of 10-15 reps with less than a minute of rest for muscular endurance. For assistance exercises like this one, it says 1-2 minutes of rest between sets may be enough.

Sets, reps, rest, and frequency by training level (bent arm lateral raise)
LevelSets × RepsRest between setsFrequency
Beginner2-3 × 12-1545-60s2-3 sessions/week
Intermediate3-4 × 10-1560-90s2-3 sessions/week
Advanced3-4 × 8-15 (single-arm or drop sets)60-120s2-3 sessions/week

Where in your workout. Place bent arm lateral raises late in the session, after compound shoulder or upper-body pressing work like shoulder press, Arnold press, push-ups, or chest press. Isolation work is an accessory. Doing it first will fatigue the medial deltoid and underload your main compound lifts. Total weekly volume of 10-20 sets for the side delts (across all lateral raise variations) is the general hypertrophy range.

Form floor over rep targets. If you can't hit the rep target with locked-in 90-degree elbow angle, no shrugging, and a slow, controlled descent, drop the weight by one increment and restart the set. Hitting "8 reps" with momentum builds your traps and forearms, not your medial delts. Slow, boring, and burning is the right feel.

How FitCraft Programs Bent Arm Lateral Raises

The FitCraft app includes the bent arm lateral raise as a beginner strength exercise, done standing with a dumbbell in each hand, and can build it into your program based on your assessment results. Its interactive 3D demonstration lets you zoom in and check the arm path before you pick up a dumbbell. As you get stronger, the app adjusts your workouts to match your progress.

Frequently Asked Questions

What muscles does the bent arm lateral raise work?

The bent arm lateral raise mainly works the lateral (side) deltoid, the muscle responsible for shoulder width, with the anterior (front) deltoid as a secondary muscle. The 90-degree elbow bend shortens the lever arm compared to a straight-arm lateral raise, which reduces the torque demand at the shoulder.

Is the bent arm lateral raise easier than a straight arm lateral raise?

Yes. Bending the elbow to 90 degrees shortens the lever arm, which reduces the torque your shoulder has to produce at any given dumbbell weight. That means you can use heavier dumbbells or complete more reps with the same weight compared to the straight-arm version. This makes the bent arm lateral raise a good starting point for beginners, and the FitCraft app rates it Beginner. If you are returning from a shoulder injury, get a physical therapist's go-ahead first.

How heavy should bent arm lateral raises be?

Because the shorter lever arm makes the exercise more manageable, most people can use slightly heavier dumbbells than they would for straight-arm lateral raises. Men typically start with 10-20 lb dumbbells, women with 5-12 lbs. If you cannot pause at the top for a full second without swinging, the weight is too heavy. Control always beats load on this exercise.

Should I do bent arm or straight arm lateral raises?

Both versions train the side deltoid, but they divide the work differently. Coratella et al. (2020) found much higher side deltoid activity with the straight arm, while the bent arm produced more front deltoid activity than the standard straight-arm raise. ACE's 2014 shoulder study still ranked the bent arm lateral raise second of ten exercises for the middle deltoid. Choose the straight-arm version to focus on the side deltoid, and the bent arm version if you want a shorter lever that also works the front deltoid.

Can I do bent arm lateral raises every day?

The medial deltoid recovers relatively quickly, but daily training of any muscle is not recommended. Two to three sessions per week with at least 48 hours between sessions allows proper recovery and adaptation. Total weekly volume of 10-20 sets for the side delts is the general hypertrophy recommendation, and bent arm lateral raises can share that volume with other shoulder exercises.

Can I do bent arm lateral raises with shoulder impingement or rotator cuff pain?

If you have active shoulder impingement, rotator cuff tendinopathy, or pain during shoulder abduction, see a physical therapist before continuing. The bent arm version's shorter lever arm reduces the torque at the shoulder for a given dumbbell, but raising the upper arms to shoulder height still loads the subacromial space. Many people can substitute scapular health work (W-raise, Y-raise, T-raise, pull-apart) in the short term and reintroduce lateral raise patterns once symptoms settle and a clinician clears overhead loading.