Summary The stiff-arm pulldown is a resistance-band exercise where you pull a band anchored above head height down in an arc, from arms straight out in front of you to your thighs. It works the latissimus dorsi, which pulls your straight arms down to your sides, and the lower trapezius, which pulls your shoulder blades down as your arms come down. The defining cue is simple: keep the same elbow angle, pull your hands down to your thighs, and keep your body still without leaning back. The FitCraft app rates it Beginner. Make it easier with a lighter band or by stepping closer to the anchor, and harder with a heavier band, a bigger step back, a longer pause at your thighs or a slower return.

If you feel rows and chin-ups mostly in your arms, stiff-arm pulldowns can help. The exercise moves your arms at the shoulder without bending the elbows, so the lats do the job: pull your straight arms down to your sides.

Use it as a warm-up drill before heavier pulling, an accessory exercise after rows, or a lower-load back option when you train at home with bands.

Quick Facts: Stiff-Arm Pulldowns

This exercise belongs to
Stiff-arm pulldown muscles worked: lats and lower traps highlighted on the back, standing with a band anchored high in front
Your lats pull your straight arms down from in front of you to your sides. Your lower traps pull your shoulder blades down as your arms come down, which keeps your shoulders away from your ears.

Muscles Worked

Primary movers: the latissimus dorsi and the lower trapezius. The lats pull your straight arms down from in front of you to your sides: they shorten as you pull the band down, then lengthen under tension as your arms rise again. The lower trapezius pulls your shoulder blades down as your arms come down, which is why your shoulders stay away from your ears.

What the research shows: a 2022 EMG study of 20 active adults compared the cable straight arm pulldown with the barbell pullover at different grip widths and measured the highest latissimus dorsi activity in the straight arm pulldown (Muyor et al., 2022). It used a cable rather than a band, but the arm path is the same. Keeping the elbows at one angle takes the elbow bend out of the pull, so the lats do the pulling. The band also gets harder near the bottom, where it stretches furthest, so finish each rep with your shoulders still down.

Step-by-Step: How to Do a Stiff-Arm Pulldown

  1. Anchor the band. Loop a resistance band around a sturdy anchor above head height in front of you, such as a pull-up bar or a door anchor at the top of a closed door. Check the band for nicks or tears first, and set up so it can't snap toward your face. Grab the band with both hands, palms facing down, about shoulder-width apart.
  2. Set your stance. Step back until the band is slightly tight with your arms straight out in front of you, anywhere from about shoulder height to overhead. Stand with your feet hip- to shoulder-width apart and your knees soft. Stand tall or lean slightly forward from the hips, with your back flat and your ribs down.
  3. Brace your core. Do it before the first rep. Your body should stay still while the arms move, and you never lean back to pull.
  4. Pull down with nearly straight arms. Keep your arms straight or softly bent at the same angle the whole time, and pull the band down in a smooth arc until your hands reach the front of your hips or thighs. Don't pull them back behind you. Think about driving your upper arms down through your lats, with your shoulders down away from your ears.
  5. Squeeze and return. Pause for a second or two when your hands reach your thighs and squeeze the sides of your back. Then let your arms rise slowly back to the start, never letting the band yank them up. Keep your head neutral, your body still and your shoulders away from your ears. Breathe out as you pull down and in as your arms rise.

Get this exercise in a personalized workout

FitCraft, our mobile fitness app, uses its AI coach Ty to program compound strength exercises like this into your plan at the right volume and intensity, based on your level, goals, and equipment. Ty was designed and trained by , MPH (Brown University) and NSCA-CSCS, with research published in the Journal of Strength and Conditioning Research and Medicine & Science in Sports & Exercise.

Take the Free Assessment Free • 2 minutes • No credit card
Band straight-arm pulldown proper form: standing tall, arms nearly straight, hands down at the thighs, band anchored high
The stiff-arm pulldown is also called the straight-arm pulldown. Keep the same elbow angle the whole rep, pull in an arc until your hands reach your thighs, and let your arms rise slowly so the band never yanks them up.

Common Mistakes (and How to Fix Them)

Bending the Elbows

What it looks like: Your elbows bend as you pull and straighten as you return, turning the movement into a banded lat pulldown.

Why it's a problem: Once your elbows bend and straighten, the bending arms take over part of the pull and the lats do less of the work.

The fix: Pick an elbow angle, straight or softly bent, and hold it the whole rep. If you cannot keep the angle fixed, use a lighter band.

Swaying the Torso

What it looks like: Your upper body rocks forward and back with each rep, or you lean back and arch your lower back to pull the band down.

Why it's a problem: Momentum takes tension away from the lats and can irritate the lower back over repeated sets.

The fix: Brace before the first pull. Step closer to the anchor or use a lighter band if the band is yanking your torso out of position.

Pulling Past the Thighs

What it looks like: Your hands shoot behind your hips after they pass the thighs.

Why it's a problem: Past the thighs, the shoulder moves into extra extension and the lats no longer do the work.

The fix: Stop at the thighs. Squeeze there, pause for a second or two, and return.

Shrugging at the Start

What it looks like: The shoulders climb toward your ears at the start of the rep, when your arms are up and the band pulls on them.

Why it's a problem: Shrugging lets go of the shoulder-blade position the lower trapezius is there to hold, so you start the pull from a poor position.

The fix: Whether you start at shoulder height or overhead, keep space between your ears and shoulders before each rep.

Craning the Neck

What it looks like: Your chin juts forward, or you look up at the anchor through every rep.

Why it's a problem: It strains your neck.

The fix: Keep your eyes forward or slightly down. Let the band move, not your head.

Letting the Band Snap Your Arms Up

What it looks like: After the pull, you relax and the band yanks your arms back up.

Why it's a problem: You lose control of the return, which is half of every rep.

The fix: Let your arms rise slowly back to the start, under control on every rep.

Anchoring the Band Low or Under Your Feet

What it looks like: The band is tied at waist height or lower, or you stand on it.

Why it's a problem: The band then pulls from below, which turns the move into a raise instead of a pulldown.

The fix: Anchor the band to something sturdy above head height, in front of you.

Stiff-Arm Pulldown Variations: Regressions and Progressions

Choose the version that lets you keep the elbows fixed and your body still. Any shoulder pain means stop, whichever version you use.

Lighter Band or Closer to the Anchor (Easier)

Use a lighter band, or step a little closer to the anchor so the band is less tight. Both cut the load without changing the movement.

Standard Two-Arm Band Stiff-Arm Pulldown

Use both hands, pull toward the thighs, pause there for a second or two, and return slowly. This is the main version for most home workouts and the one the FitCraft app teaches, rated Beginner.

Shoulder-Height or Overhead Start

You can start with your arms straight out at about shoulder height, the way the FitCraft app shows it, or higher, up to overhead. Both are the standard exercise; pick the start you can control with your shoulders down.

Longer-Pause Stiff-Arm Pulldown (Harder)

Hold your hands at your thighs for longer than the standard second or two, then let your arms rise slowly. The longer pause keeps the lats working at the bottom of each rep.

Slow Return or Heavier Band (Harder)

Let your arms rise more slowly on every rep. The slow return adds time under tension without needing a much heavier band. When that is easy, use a heavier band or step a little farther back from the anchor.

Stiff-arm pulldown common mistakes listed beside the correct pose: arms nearly straight, hands at the thighs, body upright
Keep your body still with a flat back instead of leaning back or rocking to pull, and keep your shoulders down. Anchor the band above head height, because a band anchored low or under your feet turns this into a raise.

When to Avoid Stiff-Arm Pulldowns

A few conditions call for a check with your doctor or physical therapist before you do stiff-arm pulldowns. A burn along the sides of your back is normal; any pain in a joint, your lower back or your neck means stop. Always consult your physician or physical therapist for personalized guidance.

Related Exercises

If stiff-arm pulldowns fit your routine, these exercises build the same pulling pattern or the stability needed to do it well:

How to Program Stiff-Arm Pulldowns

Program stiff-arm pulldowns like a controlled resistance exercise, then let form decide the load. The American College of Sports Medicine Position Stand on resistance training supports progressive sets, reps, rest, and weekly frequency matched to training level (Ratamess et al., 2009). It gives no set and rep ranges for this exercise, so treat the table below as a practical starting point.

Stiff-arm pulldown programming by stage
Stage Sets × Reps Rest between sets Frequency
Starting out (lighter band) 2-3 × 8-12 90-120 seconds 2-3 sessions/week
Standard (two-arm band pulldown) 3-4 × 10-15 90-150 seconds 2-4 sessions/week
Harder (heavier band, longer pauses or a slower return) 3-5 × 8-12 with a longer pause at the thighs or a slower return 120-180 seconds 2-4 sessions/week

Where in your workout: use stiff-arm pulldowns early as a warm-up drill for your lats before rows or chin-ups, or later as an accessory after heavier pulling. If you use them first, keep the band light enough that the set does not tire you before your main pulling exercises.

Form before rep targets: stop a set when your elbows start bending, your shoulders shrug, your torso sways or your hands pull past your thighs. A clean set of 10 beats a messy set of 15.

How FitCraft Programs This Exercise

FitCraft places pulling exercises inside a balanced strength program built around your level, goals, and available equipment. The app includes the stiff-arm pulldown as its own exercise, rated Beginner, with a 3D demonstration. For a movement like this, the right band is the one that lets the lats do the work, not the heaviest one you can move.

As you get stronger, the app adjusts your training to match your level. The goal is steady progress with form that still looks controlled.

Frequently Asked Questions

What muscles does the stiff-arm pulldown work?

The stiff-arm pulldown works two muscles: the latissimus dorsi and the lower trapezius. The lats pull your straight arms down from in front of you to your sides, and the lower trapezius pulls your shoulder blades down as your arms come down, which keeps your shoulders away from your ears.

Can I do stiff-arm pulldowns with shoulder pain?

Not while your shoulder hurts. Any shoulder pain, pinching or instability means stop the exercise, and so does a recent shoulder injury. See a doctor or physical therapist, and ask them when and how to return. A burn along the sides of your back is normal; pain in the shoulder joint is not.

Is the stiff-arm pulldown good for beginners?

Yes. The FitCraft app rates it Beginner, and a light resistance band makes it beginner friendly because the movement is simple and the load is easy to scale. It is especially useful for learning what a lat contraction feels like before heavier rows or chin-ups.

Can I do stiff-arm pulldowns without a cable machine?

Yes. This guide uses a resistance band anchored above head height, which works well at home if the anchor is sturdy and high enough. A cable machine is an option in a gym, but it is not required for the movement pattern.

How heavy should my resistance band be?

Start lighter than you think. If your elbows bend, shoulders shrug, or torso sways to finish the rep, the band is too heavy. Pick a band that lets you finish every rep of your set with clean form and a clear lat squeeze; the programming table below gives a starting point.

How is the stiff-arm pulldown different from a lat pulldown?

A lat pulldown bends the elbows, so the biceps help pull. A stiff-arm pulldown keeps the elbows at one angle, so the lats and lower traps do the work and the lats are easier to feel.